Red, blue and purple iron oxide pigment for permeable concrete floor coloring

Using red, blue, and purple iron oxide pigments for coloring permeable concrete floors can result in vibrant and long-lasting finishes. Iron oxide pigments are commonly used in concrete coloring due to their excellent lightfastness, resistance to fading, and durability. Here are some steps to follow when using iron oxide pigments for coloring permeable concrete floors:Prepare the Concrete Surface: Ensure that the concrete surface is clean, dry, and free from any loose debris or contaminants.Mix Iron Oxide Pigments: Depending on the desired shade, mix the appropriate amount of red, blue, and purple iron oxide pigments with the concrete material. The specific ratio will vary based on the manufacturer's instructions and the desired intensity of color.Add Pigments to Concrete Mix: Incorporate the iron oxide pigments into the concrete mix during the batching process. This can be done by adding the pigments directly to the dry concrete mix or by pre-blending them with water before adding them to the mix.Thoroughly Mix the Concrete: Use a concrete mixer or appropriate mixing equipment to ensure that the pigments are thoroughly dispersed throughout the concrete mix. Continue mixing until a uniform color is achieved.Pour or Apply the Colored Concrete: Pour or apply the colored concrete onto the prepared surface. Use a screed or trowel to level and smooth the surface as desired. Ensure that the concrete is properly compacted to provide the desired permeability.Allow for Curing: After pouring or applying the colored concrete, allow sufficient time for the concrete to cure and harden. Follow the manufacturer's instructions for recommended curing times.Seal the Surface (optional): To enhance the color vibrancy and protect the surface, consider applying a suitable concrete sealer. This can help to prevent color fading and provide added durability.Remember to follow safety guidelines and use appropriate protective equipment when working with concrete and iron oxide pigments. Additionally, it is advisable to conduct a trial or test area before proceeding with the full application to ensure desired results.